Dimensions (W x D x H)[mm] System Control
550 x 455 x 1900 Setting the Time Year,Month,Date,Hour,Minute
Coating Off-white powder coating Circuit input time 2sec
External materials STEEL System recognition time 1sec
Weight 150kg Release time 0 to 30 sec
Extinguishing agents CO2 Auto Inspection Date(*1) 0 to 30 day
CO2 Storage capacity 45kg Network Address Baud Rate
Operating Temperature -10 ~ 40 ℃ Event Alarm 256 kinds
Input Power AC 220V, 60Hz System Operation Detectors, and system test
Redundant power Ni-Cd Battery
DC 24V, 1,300mA
<Fire recognition>
AND mode
Recognized by fire during the simultaneous operation of the sensor 2 circuit
OR mode
Recognized by fire during the simultaneous operation of the sensor 1 circuit

<Emission setting>
Auto mode
Automatically in case of fire extinguishing agents of the cylinder emissions
Manual mode
Extinguishing agents manually press the button emissions
<System Test>
Detector operation test(*2)
*Test once a month on a specific date, work is possible
Detector manual test(*3)
* System circuit test
* Detector test
* Abnormalities of the auxiliary power test

<Function to stop>
  * Stop siren and voice broadcasting
  * Stop solenoid

Solenoid DC 24V, 1.5V
RELAY 250V, 5A
Alarm Voice of fire,
Voice of checking, Siren
* 1, 2 Auto Inspection Date: Date can be set if the BIT function of our detector linkage and use
* 3 Detector Test : BIT function of our detector sensor test using the work function can be used